News
Case Study
Delcam’s five-axis CAM software opens new business opportunities
The addition of two CMS five-axis machining centres, programmed with Delcam’s PowerMILL CAM software, has opened new business opportunities for rapid prototyping and high-speed machining specialist Oxon Prototypes.
More case studies >>
Downloads
- You are here:
- Home
- »
- PowerMILL Modelling
- »
- PowerMILL Modelling Video Links
PowerMILL Modelling - Video Links
Select any of the links below to view each video:
Align using a Workplane. Take a part that is currently in car line and rotate it to line-of-draw by adding a user defined datum. |
 |
| Cover a simple area. Simplify machining over an area that will be spark eroded by modifying the trim boudaries of the surrounding surfaces. | |
| Create a cap surface. Cover a complex area with a fill-in surface. This fill-in is tangent continuous with the surrounding surfaces. | |
| Round off a sharp edge. Create a complex fillet over multiple surfaces to round off a sharp edge. | |
| Re-trim the ends of a complex fillet. Trim the ends of a complex 3D fillet to the surrounding faces. | |
| Create a split-surface. Create a single complex split surface by simply selecting the horizon curve of the part. The edges of the split surface may then be trimmed to the extents of the die insert. | |
| Adding draft to ensure a part can be moulded. Modify a complex region to ensure it has sufficient draft for moulding. | |
| Creating a reference surface for multi-axis machining. Create a tapered extrusion surface to control tool motion during 5-axis milling. | |
| Creating a shroud surface for a bladed disk. Generate a surface revolution representing the blank from which a blisk will be machined. | |